A-Z index

RILSAMID® AECHVO a polyamide 12 resin. This natural grade is designed for cable coating but is also suitable for tube extrusion.

RILSAMID® AECNO TL is a polyamide 12. This natural grade is designed for cable coating.

RILSAMID® AECV BLACK P40 T8L resin is a black colored polyamide 12 compound. This plasticized grade is designed for cable coating.

RILSAMID® AECV BLACK T8L resin is a black colored polyamide 12 compound. This grade is designed for cable coating.

RILSAMID® AESN BLACK P110 TL is a polyamide 12 compound. This impact-modified grade is designed for tube extrusion and has improved hydrolysis resistance. It is a market standard to produce automotive cooling & selective catalyst reduction (SCR) lines.

RILSAMID® AESN BLACK P201 TL is a polyamide 12 compound. This plasticized and impact-modified grade is designed for tube extrusion. It is a market standard to produce air brake tubing (PHLY) & automotive cooling lines.

RILSAMID® AESN BLACK P202 T6L is a polyamide 12 compound. This plasticized and impact-modified high temperature grade is specially designed for automotive fluid transfer line applications.

RILSAMID® AESN BLACK P302 TL is a polyamide 12 compound. This plasticized an impact-modified grade is designed for tube extrusion. It is a market standard to produce air brake tubing (HIPHL) lines.

RILSAMID® AESN BLACK P40 TL is a polyamide 12 compound. This plasticized grade is designed for tube extrusion, including air brake tubing (PHL).

RILSAMID® AESN BLACK P401 TL is a polyamide 12 compound. This plasticized an impact-modified grade is designed for tube extrusion. It is a market standard to produce air brake tubing (HIPHL) lines.

RILSAMID® AESN BLACK P40 TL is a polyamide 12 compound. This high temperature grade is designed for tube extrusion.

RILSAMID® AESNO 14 TL is a polyamide 12 compound. This natural grade is designed for tube extrusion and specially adapted to applications in which transparency is required.

RILSAN® AESNO MED is a polyamide 12 resin. This natural grade is designed for tube extrusion and is approved in medical applications.

RILSAMID® AESNO P10 TL is a polyamide 12 compound. This natural grade is designed for tube extrusion.

RILSAMID® AESNO P201 TL is a polyamide 12 compound. This natural plasticized & impact-modified grade is designed for tube extrusion, including air brake tubing (PHLY).

RILSAMID® AESNO P302 TL is a polyamide 12 compound. This natural plasticized & impact-modified grade is designed for tube extrusion, including air brake tubing (HIPHL).

RILSAMID® AESNO P40 TL is a polyamide 12 compound. This natural plasticized grade is designed for tube extrusion, including air brake tubing (PHL).

RILSAMID® AESNO P401 TL is a polyamide 12 compound. This natural plasticized & impact-modified grade is designed for tube extrusion, including air brake tubing (HIPHL).

RILSAMID® AESNO TL is a rigid polyamide 12. This natural grade is designed for tube extrusion.

RILSAMID® AMN BLACK P20 TLD is a polyamide 12 compound. This plasticized grade is designed for injection molding.

RILSAMID® AMN BLACK P40 TLD is a polyamide 12 compound. This plasticized grade is designed for injection molding.

RILSAMID® AMN BLACK T6LD is a polyamide 12 compound. This grade is designed for injection molding.

RILSAMID® AMNO is a polyamide 12 resin. This natural grade without additive is designed for injection molding.

RILSAN® AMNO MED is a polyamide 12 resin. This natural grade is designed for injection molding and is approved in medical applications. Upon request, letters regarding USP Class VI compliance can be provided.

RILSAMID® AMNO P20 TLD is a polyamide 12 compound. This natural plasticized grade is designed for injection molding.

RILSAMID® AMNO P40 TLD is a polyamide 12 compound. This natural plasticized grade is designed for injection molding.

RILSAMID® AMNO TLD is a polyamide 12 compound. This natural grade is designed for injection molding.

RILSAMID® AMVO TLD is a polyamide 12 compound. This natural grade is designed for injection molding.

RILSAMID® ASR 13 a polyamide 12 compound. This black reinforced grade is designed for injection molding & is used to produce automotive fittings & quick connectors, the incorporation of carbon fiber leading to a product with same rigidity as a 30% glass fiber reinforced grade & electrostatic discharge (ESD) performance for conductive parts.

RILSAMID® AZM 23 BLACK T6LD resin is a polyamide 12 compound. This glass fiber reinforced grade is designed for injection molding and is used to produce automotive fittings & quick connectors.

RILSAMID® AZM 30 O TLD resin is a polyamide 12 compound. This glass fiber reinforced grade is designed for injection molding and is used to produce automotive fittings & quick connectors.

RILSAN® AZM 50 BLACK T6LD is a polyamide 12 compound. This glass fiber reinforced grade is designed for injection molding and is used to produce air brake or automotive fittings & quick connectors, the incorporation of a high amount of glass fibers leading to a very rigid and tough product.

RILSAMID® MA 4411 BLACK a polyamide 12 compound. This plasticized and impact-modified grade is designed for tube extrusion. It is a market standard to produce automotive fuel lines.

RILSAMID® MA 4411 NAT a polyamide 12 compound. This natural plasticized and impact-modified grade is designed for tube extrusion. It is a market standard to produce automotive fuel lines.

RILSAN® 8020 is a translucent flexible copolyamide based on renewable resources and without plasticizer. This grade is specially designed for medical applications.

RILSAN® 8020 is a translucent flexible copolyamide based on renewable resources and without plasticizer. This grade is specially designed for medical applications.

RILSAN® BECNO TL is a polyamide 11 compound. It is a polyamide produced from a renewable & sustainable source (castor oil). This natural grade is designed for cable coating.

RILSAN® BECV BLUE T8L is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This grade is designed for cable coating but is also suitable for tube extrusion.

RILSAN® BESN BLACK P024 CTL is a polyamide 11 extrusion grade produced from a renewable & sustainable source (castor oil). This impact-modified grade is specially designed for low extractible mono or multi-layer automotive fuel line applications.

RILSAN® BESN BLACK P123 TL is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This impact-modified grade is designed for tube extrusion and has improved hydrolysis resistance. It is a market reference to produce automotive cooling & selective catalyst reduction (SCR) lines.

RILSAN® BESN BLACK P20 TL is a polyamide 11 compound. It is manufactured from a renewable and sustainable source (castor oil). This plasticized grade is designed for tube extrusion, it's a market reference in the automotive fluid transfer line applications.

RILSAN® BESN BLACK P210 TL is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This plasticized and impact-modified grade is designed for tube extrusion, it's a market reference to produce air brake tubing (PHLY) & automotive fluid transfer lines (incl. fuel & cooling).

RILSAN® BESN BLACK P213 TL is a polyamide 11 extrusion grade produced from a renewable & sustainable source (castor oil). This plasticized and impact-modified grade is specially designed to be used as external layer of multi-layer automotive fuel line applications.

RILSAN® BESN BLACK P40 TL is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This plasticized grade is designed for tube extrusion, including air brake tubing (PHL)

RILSAN® BESN BLACK TL is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This grade is designed for tube extrusion.

RILSAN® BESN G9 TL is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This black grade with improved friction properties is designed for tube extrusion.

RILSAN® BESNO 23 TL4 CC is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This natural grade is designed for film applications.

RILSAN® BESNO P400 TL NL is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This plasticized natural grade and designed for tube extrusion.

RILSAN® BESNO MED is a polyamide 11 resin. It is produced from a renewable & sustainable source (castor oil). This natural grade is designed for tube extrusion and is approved in medical applications. Upon request, letters regarding USP Class VI compliance can be provided.

RILSAN® BESNO P20 TL is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This natural plasticized grade is designed for tube extrusion.

RILSAN® BESNO P20 TLO is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This natural plasticized grade is designed for tube extrusion, with a particularly low amount of oligomers.

RILSAN® BESNO P210 TL is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This natural plasticized & impact-modified grade is designed for tube extrusion.

RILSAN® BESNO P40 TL is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This natural grade is designed for tube extrusion. It's a market reference in the air brake (PHL) & automotive fluid transfer line applications.

RILSAN® BESNO P40 TLO is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This natural plasticized grade is designed for tube extrusion, with a particularly low amount of oligomers.

RILSAN® BESNO P40 TLX is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This natural grade is designed for tube extrusion. It's a market reference for the extrusion of large pipes used in the Oil and Gaz industry.

RILSAN® BESNO P40 W6 TL is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This natural color plasticized grade is designed for tube extrusion. It is classified as Halogen Free Flame Retardant (HFFR).

RILSAN® BESNO TL is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This natural grade is designed for tube extrusion.

RILSAN® BESNO TL NB  is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This natural grade is designed for tube extrusion and does not contain any optical brightener.

RILSAN® BESVO A FDA is a polyamide 11 resin. It is produced from a renewable & sustainable source (castor oil). This natural grade is designed for tube extrusion. It contains a negligible amount of oligomers and is adapted to food contact applications.

RILSAN® BESVO A FDA is a polyamide 11 resin. It is produced from a renewable & sustainable source (castor oil). This natural grade is designed for tube extrusion. It contains a negligible amount of oligomers and is approved in medical applications. Upon request, letters regarding USP Class VI compliance can be provided.

RILSAN® electrostatic spray powders are thermoplastic polyamides obtained from renewable resources. Outstanding characteristics: abrasion resistance, corrosion resistance, impact resistance, sound reduction, flexibility, low coefficient of friction.

RILSAN® fluid bed powders are thermoplastic polyamides obtained from renewable resources. Outstanding characteristics: abrasion resistance, corrosion resistance, impact resistance, sound reduction, flexibility, low coefficient of friction.

RILSAN® BMN BLACK TLD  is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This grade is designed for injection molding and is used to produce of automotive fittings & quick connectors.

RILSAN® BMN G8 TLDA is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This black grade with improved friction properties is designed for injection molding and approved for drinking water contact.

RILSAN® BMN Y TLD is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This grade with improved friction properties is ''self lubricated'' and designed for injection molding.

RILSAN® BMNO is a polyamide 11 resin. It is produced from a renewable & sustainable source (castor oil). This natural grade contains no additive and is specially designed for food contact application

RILSAN® BMNO MED is a polyamide 11 resin. It is produced from a renewable & sustainable source (castor oil). This natural grade is designed for injection molding and is approved in medical applications. Upon request, letters regarding USP Class VI compliance can be provided.

RILSAN® BMNO P20 TLD is a polyamide 11 compound.  It is produced from a renewable & sustainable source (castor oil). This natural plasticized grade is designed for injection molding

RILSAN® BMNO P40 TLD is a polyamide 11 compound.  It is produced from a renewable & sustainable source (castor oil). This natural plasticized grade is designed for injection molding

RILSAN® BMNO SG FILAGE is a polyamide 11 resin. It is produced from a renewable & sustainable source (castor oil). This natural grade is particularly suitable for textile applications.

RILSAN® BMNO TLD  is a polyamide 11. It is produced from a renewable & sustainable source (castor oil). This natural grade is designed for injection molding and is used to produce automotive fittings & quick connectors.

RILSAN® BMV WHITE5-P20-D is a polyamide 11 compound.  It is produced from a renewable & sustainable source (castor oil). This grade is designed for injection molding

RILSAN® BMVO TLD is a polyamide 11 compound. RILSAN® BMVO TLD is a polyamide 11 compound produced from a renewable & sustainable source (castor oil). This natural grade is designed for injection molding and is used to produce automotive fittings & quick connectors.

RILSAN® BSR 10 BLACK R10 TLD is a carbon fibers reinforced polyamide 11 produced from a renewable & sustainable source (castor oil). This black grade is designed for injection molding . This grade contains 10% of recycled material and is part of the Virtucycle® program.

RILSAN® BSR 20 BLACK R20 TLD is a carbon fibers reinforced polyamide 11 produced from a renewable and sustainable source (castor oil). This black grade is designed for injection molding . This grade contains 20% of recycled material and is part of the Virtucycle® program.

RILSAN® BSR 30 is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This black reinforced grade is designed for injection molding and is used to produce automotive fittings or quick connectors, the incorporation of carbon fiber leading to a very rigid and tough product with electrostatic discharge (ESD) performance.

RILSAN® BSR 30 BLACK R30 TLD is a carbon fibers reinforced polyamide 11 produced from a renewable and sustainable source (castor oil). This black grade is designed for injection molding. This grade contains 30% of recycled material and is part of the Virtucycle® program.

RILSAN® BUM 30 BLACK is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This reinforced grade is designed for injection molding, the incorporation of glass beads yielding a virtually isotropic reinforced product.

RILSAN® BUM 30 O is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This natural reinforced grade is designed for injection molding, the incorporation of glass beads yielding a virtually isotropic reinforced product. It is approved for drinking water contact.

RILSAN® BZM 23 G9 is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This black glass fiber reinforced grade with improved friction properties is designed for injection molding.

RILSAN® BZM 30 BLACK TL is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This glass fiber reinforced grade is designed for injection molding and is a market reference to produce air brake or automotive fittings & quick connectors.

RILSAN® BZM 30 O T3L is a polyamide 11 compound.  It is produced from a renewable & sustainable source (castor oil). This natural glass fiber reinforced grade is designed for injection molding. It has a superior color stability, which makes particularly adapted to consumer applications.

RILSAN® BZM 30 O TL is a polyamide 11 compound.  It is produced from a renewable & sustainable source (castor oil). This natural color glass fiber reinforced grade is designed for injection molding.

RILSAN® BZM 30 O TLDA is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This natural glass fiber reinforced grade is designed for injection molding and is approved for drinking water contact.

RILSAN® BZM 7 O TL is a polyamide 11 compound.  It is produced from a renewable & sustainable source (castor oil). This natural glass fiber reinforced grade is designed for injection molding and is used in sport & consumer applications.

RILSAN® BZM 8 O T3L is a polyamide 11 compound.  It is produced from a renewable & sustainable source (castor oil). This natural color glass fiber reinforced grade is designed for injection molding. It has a superior color stability, which makes particularly adapted to consumer applications.

RILSAN® BZM 8 O TL is a polyamide 11 compound.  It is produced from a renewable & sustainable source (castor oil). This natural glass fiber reinforced grade is designed for injection molding and is used to produce automotive fittings & quick connectors.

RILSAN® CLEAR G170 is a high-performance transparent polyamide resin with outstanding thermal resistance. This grade has been designed for injection molding applications.

RILSAN® CLEAR G170 is a high-performance transparent polyamide resin with outstanding thermal resistance. This grade has been designed for injection molding applications.

RILSAN® CLEAR G170 MED is a high performance transparent polyamide resin. This grade with outstanding thermal resistance is approved in medical applications. Upon request, letters regarding USP Class VI compliance can be provided.

RILSAN® CLEAR G170 MED is a high performance transparent polyamide resin. This grade with outstanding thermal resistance is approved in medical applications. Upon request, letters regarding USP Class VI compliance can be provided.

RILSAN® CLEAR G820 RNEW® is a high performance transparent polyamide with outstanding chemical resistance and stress cracking resistance. It is partially produced from a renewable and sustainable source (castor oil). This grade has been designed for injection molding applications.

RILSAN® CLEAR G820 RNEW® A is a high performance transparent polyamide with outstanding chemical resistance and stress cracking resistance. It is partially produced from a renewable and sustainable source (castor oil). This grade has been designed for injection molding applications.

RILSAN® CLEAR G850 RNEW® is a high performance transparent amorphous polyamide. It is partially produced from a renewable and sustainable source (castor oil). This grade has been specially designed for injection molding applications, ideally suited for optic as high-end eyewear frames.

RILSAN® CLEAR G850 RNEW® MED is a transparent amorphous polyamide. It is partially produced from a renewable and sustainable source (castor oil). This grade with very high purity is approved in medical applications. Upon request, letters regarding USP Class VI compliance can be provided.

RILSAN® EVOLUTION ENO P210 TL is a polyamide 11 compound. It is partially produced from a renewable & sustainable source (castor oil). This grade is designed for high pressure fuel contact applications.

RILSAN® FMNO is a polyamide 11 resin. . It is produced from a renewable & sustainable source (castor oil). It is unreinforced and designed for injection molding or melt spinning process.

RILSAN® HT CESV BLACK P010 TL is polyphtalamide compound. It is partially produced from a renewable & sustainable source (castor oil). This flexible grade with outstanding thermal & chemical resistance (incl. unique water coolant resistance) is typically used to replace metal or rubber parts in very demanding automotive fluid transfer lines.

RILSAN® HT CSR 13 is polyphtalamide compound. It is partially produced from a renewable & sustainable source (castor oil). This black reinforced grade is designed for injection molding & is used to produce high temperature and high chemical resistance automotive fittings & quick connectors, the incorporation of carbon fiber leading to a product with same rigidity as a 30% glass fiber reinforced grade & electrostatic discharge (ESD) performance for conductive parts.

RILSAN® HT CZM 30 BLACK TLD is a polyphtalamide. It is partially produced from a renewable & sustainable source (castor oil). This glass-reinforced grade is formulated and designed for injection molding in very demanding applications (high temperature or chemical resistance). It is specially used as a substitute to polyamide 12 for fittings & quick-connector body as it can be injected in same mold (same shrinkage).

RILSAN® HT CZM 30 LASER TLD is a polyphtalamide. It is partially produced from a renewable & sustainable source (castor oil). This black but laser transparent glass-reinforced grade is formulated and designed for injection molding in very demanding applications (high temperature or chemical resistance). It is specially used as a substitute to polyamide 12 for fittings & quick-connector body as it can be injected in same mold (same shrinkage).

RILSAN® KNO is a polyamide 11 resin. It is produced from a renewable & sustainable source (castor oil). This natural grade is specially designed for injection molding.

RILSAN® KNO T3L is a polyamide 11 resin. It is produced from a renewable and a sustainable source (castor oil). This natural color grade is specially designed for injection molding.

RILSAN® MB 3000 NAT is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This natural color grade is designed for injection molding and is classified as Halogen Free Flame Retardant (HFFR). It combines very high flexibility with good impact resistance.

RILSAN® MB 3610 NAT is a polyamide 11 compound. It is produced from a renewable & sustainable source (castor oil). This natural grade is plasticized and specially designed for pneumatic applications. It combines very high flexibility with good impact resistance.

RILSAN® electrostatic spray powders are thermoplastic polyamides obtained from renewable resources. Outstanding characteristics: abrasion resistance, corrosion resistance, impact resistance, sound reduction, flexibility, low coefficient of friction.

RILSAN® fluidized bed powders are thermoplastic polyamides obtained from renewable resources. Outstanding characteristics: abrasion resistance, corrosion resistance, impact resistance, sound reduction, flexibility, low coefficient of friction.

RILSAN® D30 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 21 - 27 µm. RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in coatings and varnishes. The introduction of RILSAN® polyamide powders in formulations is easy thanks to their good dispersion capacity, their reduced Impact on rheology and their low density. RILSAN® polyamide powders are surface modifiers, specifically designed for texture creation. Abrasion, scratch, impact resistances and flexibility of coatings, inks and varnishes can be significantly improved using RILSAN® polyamide powders.

RILSAN® D40 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 27 - 31 µm. RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in coatings and varnishes. The introduction of RILSAN® polyamide powders in formulations is easy thanks to their good dispersion capacity, their reduced Impact on rheology and their low density. RILSAN® polyamide powders are surface modifiers, specifically designed for texture creation. Abrasion, scratch, impact resistances and flexibility of coatings, inks and varnishes can be significantly improved using RILSAN® polyamide powders.

RILSAN® D50 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 40 - 46 µm. RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in coatings and varnishes. The introduction of RILSAN® polyamide powders in formulations is easy thanks to their good dispersion capacity, their reduced Impact on rheology and their low density. RILSAN® polyamide powders are surface modifiers, specifically designed for texture creation. Abrasion, scratch, impact resistances and flexibility of coatings, inks and varnishes can be significantly improved using RILSAN® polyamide powders.

RILSAN® D60 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 43 - 55µm. RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in coatings and varnishes. The introduction of RILSAN® polyamide powders in formulations is easy thanks to their good dispersion capacity, their reduced Impact on rheology and their low density. RILSAN® polyamide powders are surface modifiers, specifically designed for texture creation. Abrasion, scratch, impact resistances and flexibility of coatings, inks and varnishes can be significantly improved using RILSAN® polyamide powders.

RILSAN® D80 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 95 - 105µm. RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in coatings and varnishes. The introduction of RILSAN® polyamide powders in formulations is easy thanks to their good dispersion capacity, their reduced Impact on rheology and their low density. RILSAN® polyamide powders are surface modifiers, specifically designed for texture creation. Abrasion, scratch, impact resistances and flexibility of coatings, inks and varnishes can be significantly improved using RILSAN® polyamide powders.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® ES range is designed for coating metal parts using the electrostatic spraying process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® ES range is designed for coating metal parts using the electrostatic spraying process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® electrostatic spray powders are thermoplastic polyamides obtained from renewable resources. Outstanding characteristics: abrasion resistance, corrosion resistance, impact resistance, sound reduction, flexibility, low coefficient of friction.

RILSAN® electrostatic spray powders are thermoplastic polyamides obtained from renewable resources. Outstanding characteristics: abrasion resistance, corrosion resistance, impact resistance, sound reduction, flexibility, low coefficient of friction.

RILSAN® electrostatic spray powders are thermoplastic polyamides obtained from renewable resources. Outstanding characteristics: abrasion resistance, corrosion resistance, impact resistance, sound reduction, flexibility, low coefficient of friction.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® ES range is designed for coating metal parts using the electrostatic spraying process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® ES range is designed for coating metal parts using the electrostatic spraying process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® electrostatic spray powders are thermoplastic polyamides obtained from renewable resources. Outstanding characteristics: abrasion resistance, corrosion resistance, impact resistance, sound reduction, flexibility, low coefficient of friction.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® ES range is designed for coating metal parts using the electrostatic spraying process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® electrostatic spray powders are thermoplastic polyamides obtained from renewable resources. Outstanding characteristics: abrasion resistance, corrosion resistance, impact resistance, sound reduction, flexibility, low coefficient of friction.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® ESY range is designed for coating metal parts using the electrostatic spraying process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® ESY range is designed for coating metal parts using the electrostatic spraying process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® ESY range is designed for coating metal parts using the electrostatic spraying process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® electrostatic spray powders are thermoplastic polyamides obtained from renewable resources. Outstanding characteristics: abrasion resistance, corrosion resistance, impact resistance, sound reduction, flexibility, low coefficient of friction.

Powder RILSAN® electrostatic spray powders are thermoplastic polyamides obtained from renewable resources. Outstanding characteristics: abrasion resistance, corrosion resistance, impact resistance, sound reduction, flexibility, low coefficient of friction.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® ESY range is designed for coating metal parts using the electrostatic spraying process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® ESY range is designed for coating metal parts using the electrostatic spraying process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations. RILSAN® ESY ORANGE 7705 provides good electrical insulation, even at low thickness. It can be used in electrical applications such as busbar coatings.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® ESY range is designed for coating metal parts using the electrostatic spraying process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations. RILSAN® ESY WHITE 7704 provides good electrical insulation, even at low thickness. It can be used in electrical applications such as busbar coatings.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® ESY range is designed for coating metal parts using the electrostatic spraying process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

Rilsan® Invent Black is a mass-colored Polyamide 11 powder made from 100% renewable source (castor oil). Polyamide 11 is a thermoplastic polymer that demonstrates excellent chemical resistance, high UV resistance, low water re-uptake and low density. The Invent range of powders has been especially designed for use with all Laser Sintering (LS) systems (adjustments to construction parameters required depending on the equipment). Rilsan® Invent Black can be used in rapid prototyping of small, complex parts, showing excellent detail resolution, together with an outstanding color stability eliminating the need for post- processing. Rilsan® Invent Black exhibits consistent performance while maintaining superior mechanical properties compared to other polymers such as Polyamide 12. The superior mechanical performance of this material, combined with its low refreshing factor (typically 50%), makes Rilsan® Invent Black the best choice for rapid manufacturing of black parts.

Rilsan® Invent Nat is a natural Polyamide 11 powder made from 100% renewable source (castor oil).Polyamide 11 is a thermoplastic polymer that demonstrates excellent chemical resistance, high UV resistance, low water re-uptake and low density.The Invent range of powders has been especially designed for use with all Laser Sintering (LS) systems (adjustments to construction parameters required depending on the equipment).Rilsan® Invent Nat can be used in rapid prototyping of small, complex parts, showing excellent detail resolution. The optimized wide processing window of Rilsan® Invent Natural enables consistent performance while maintaining excellent mechanical properties (ductility, impact resistance). The superior mechanical performance of this material, compared to other polymers such as Polyamide 12, combined with its low refreshing factor (typically 50%), makes Rilsan® Invent Natural the best choice for rapid manufacturing.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® MC range is designed for coating small items using the minicoat/maxicoat process, originally developed by Arkema to allow very high productivity. They provide superior protection against wear, impact, corrosion and chemicals. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® MC range is designed for coating small items using the minicoat/maxicoat process, originally developed by Arkema to allow very high productivity. They provide superior protection against wear, impact, corrosion and chemicals. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® MC range is designed for coating small items using the minicoat/maxicoat process, originally developed by Arkema to allow very high productivity. They provide superior protection against wear, impact, corrosion and chemicals. Please consult Arkema literature for application method and recommendations

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fluid bed powders are thermoplastic polyamides obtained from renewable resources. Outstanding characteristics: abrasion resistance, corrosion resistance, impact resistance, sound reduction, flexibility, low coefficient of friction.

RILSAN® fluid bed powders are thermoplastic polyamides obtained from renewable resources. Outstanding characteristics: abrasion resistance, corrosion resistance, impact resistance, sound reduction, flexibility, low coefficient of friction.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations

RILSAN® fluid bed powders are thermoplastic polyamides obtained from renewable resources. Outstanding characteristics: abrasion resistance, corrosion resistance, impact resistance, sound reduction, flexibility, low coefficient of friction.

RILSAN® fluid bed powders are thermoplastic polyamides obtained from renewable resources. Outstanding characteristics: abrasion resistance, corrosion resistance, impact resistance, sound reduction, flexibility, low coefficient of friction.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® fine powders are specialty polyamide powders obtained from renewable resources. RILSAN® T range is designed for coating metal parts using the fluidized bed dip coating process. They provide superior protection against wear, impact, corrosion, chemicals as well as graffiti. Please consult Arkema literature for application method and recommendations.

RILSAN® minicoat/ maxicoat powders are thermoplastic polyamides obtained from renewable resources. Outstanding characteristics: abrasion resistance, corrosion resistance, impact resistance, sound reduction, flexibility, low coefficient of friction.

RILSAN® ROTO 11 NATURAL is a polyamide 11 powder. It is produced from a renewable & sustainable source (castor oil). This grade is designed for roto molding.

RILSAN® TIEFLEX R463 BLACK CP TL is a polyamide alloy. It is partially produced from a renewable & sustainable source (castor oil). This grade is designed for multilayer air brake application (structural tie layer).

RILSAN® TIEFLEX R463 NAT TL is a polyamide alloy. It is partially produced from a renewable & sustainable source (castor oil). This grade is designed for multilayer air brake application (structural tie layer).

RILSAN® TIEFLEX R473 NAT TL is a polyamide alloy. It is partially produced from a renewable and sustainable source (castor oil). This grade is designed for multilayer air brake application (structural tie layer).

RILSAN® TIEFLEX S442 NAT TL is a polyamide alloy. It is partially produced from a renewable & sustainable source (castor oil). This grade is designed for multilayer automotive and trucks fuel lines (tie layer).

RILSAN® TIEFLEX S452 NAT T6L is a polyamide alloy. It is partially produced from a renewable & sustainable source (castor oil). This grade is designed for multilayer automotive and trucks fuel lines (structural tie layer).