A-Z index

PEBAX® 2533 SA 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SA grade offers the highest quality. It is used in sport and consumer applications, especially when food contact compliance is requested.

PEBAX® 2533 SA 01 MED is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This natural grade offers the highest quality and is approved in medical applications. Upon request, letters regarding USP Class VI compliance can be provided.

PEBAX® 2533 SD 02 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SD grade is heat & UV stabilized and contains mold release additive. It is used in sport and consumer applications.

PEBAX® 3533 SA 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SA grade offers the highest quality. It is used in sport and consumer applications, especially when food contact compliance is requested.

PEBAX® 3533 SA 01 MED is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This grade offers the highest quality and is approved in medical applications. Upon request, letters regarding USP Class VI compliance can be provided.

PEBAX® 3533 SP 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SP grade is heat & UV stabilized. It is used in sport and consumer applications.

PEBAX® 4033 SA 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SA grade offers the highest quality. It is used in sport and consumer applications, especially when food contact compliance is requested.

PEBAX® 4033 SA 01 MED is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This grade offers the highest quality and is approved in medical applications. Upon request, letters regarding USP Class VI compliance can be provided.

PEBAX® 4033 SP 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SP grade is heat & UV stabilized. It is used in sport and consumer applications.

PEBAX® 4533 SA 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SA grade offers the highest quality. It is used in sport and consumer applications, especially when food contact compliance is requested.

PEBAX® 4533 SA 01 MED is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This grade offers the highest quality and is approved in medical applications. Upon request, letters regarding USP Class VI compliance can be provided.

PEBAX® 4533 SP 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SP grade is heat & UV stabilized. It is used in sport and consumer applications.

PEBAX® 5513 SA 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SA grade offers the highest quality. It is used in sport and consumer applications, especially when food contact compliance is requested. Added to PA6, PEBAX® 5513 SA 01 enhances the properties of PA6, especially at low temperatures and low humidity content, while maintaining the transparency of the polyamide film and improving its soft touch.

PEBAX® 5513 SP 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SP grade is heat & UV stabilized. It is used in sport and consumer applications. Added to PA6, PEBAX® 5513 SP 01 enhances the properties of PA6, especially at low temperatures and low humidity content, while maintaining the transparency of the polyamide film and improving its soft touch.

PEBAX® 5533 SA 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SA grade offers the highest quality. It is used in sport and consumer applications, especially when food contact compliance is requested.

PEBAX® 5533 SA 01 MED is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This grade offers the highest quality and is approved in medical applications. Upon request, letters regarding USP Class VI compliance can be provided.

PEBAX® 5533 SN 70 BLACK is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This black colored grade offers the highest quality and electrostatic discharge (ESD) performance. It is used in sport and consumer applications, especially when conductivity is required.

PEBAX® 5533 SP 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SP grade is heat & UV stabilized. It is used in sport and consumer applications.

PEBAX® 6333 SA 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SA grade offers the highest quality. It is used in sport and consumer applications, especially when food contact compliance is requested.

PEBAX® 6333 SA 01 MED is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This grade offers the highest quality and is approved in medical applications. Upon request, letters regarding USP Class VI compliance can be provided.

PEBAX® 6333 SP 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SP grade is heat & UV stabilized. It is used in sport and consumer applications.

PEBAX® 7033 SA 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SA grade offers the highest quality. It is used in sport and consumer applications, especially when food contact compliance is requested.

PEBAX® 7033 SA 01 MED is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This grade offers the highest quality and is approved in medical applications. Upon request, letters regarding USP Class VI compliance can be provided.

PEBAX® 7033 SP 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SP grade is heat & UV stabilized. It is used in sport and consumer applications.

PEBAX® 7233 SA 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SA grade offers the highest quality. It is used in sport and consumer applications, especially when food contact compliance is requested.

PEBAX® 7233 SA 01 MED is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This grade offers the highest quality and is approved in medical applications. Upon request, letters regarding USP Class VI compliance can be provided.

PEBAX® 7233 SP 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SP grade is heat & UV stabilized. It is used in sport and consumer applications.

PEBAX® 7433 SA 01 MED is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This grade offers the highest quality and is approved in medical applications. Upon request, letters regarding USP Class VI compliance can be provided.

Pebax® Clear 1200 combines high transparency and high rigidity with the unique performance of Pebax® thermoplastic elastomer. It is produced from a renewable and sustainable source (castor oil).

PEBAX® Clear 800 combines transparency, toughness and stiffness with the unique performance of Pebax® thermoplastic elastomer.

PEBAX® ES Black 9002 UV Electrostatic Spray Powder.PEBAX® fine powders are specialty Poly Ether Block Amide powders. PEBAX® ES Black 9002 UV is designed for coating metal parts, where high friction, noise reduction or very high flexibility are required. It can be applied by conventional electrostatic spraying process. Please consult Arkema literature for application method and recommendations.

PEBAX® MH 1657 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This hydrophilic grade, when extruded into either a thin film or laminated on to a substrate, offers excellent permeability to moisture vapor while remaining waterproof. PEBAX® MH 1657 is an inherently dissipative polymer and can be dry blended or compounded with an isolative polymer to lower the surface resistivity of the final part.

PEBAX® MH 2030 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This grade is inherently dissipative polymer and can be dry blended or compounded with an isolative polymer to lower the surface resistivity of the final part.

PEBAX® MV 1074 SA 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SA grade offers the highest quality. It is used in sport and consumer applications, especially when food contact compliance is requested. This hydrophilic grade, when extruded into either a thin film or laminated on to a substrate, offers excellent permeability to moisture vapor while remaining waterproof. PEBAX® MV 1074 SA 01 is an inherently dissipative polymer and can be dry blended or compounded with an isolative polymer to lower the surface resistivity of the final part.

PEBAX® MV 1074 SA01 MED is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This grade offers the highest quality and is approved in medical applications, specially breathable films & membranes. Upon request, letters regarding USP Class VI compliance can be provided. PEBAX® MV 1074 SA 01 MED is an hydrophilic grade, when extruded into either a thin film or laminated on to a substrate, offers excellent permeability to moisture vapor while remaining waterproof. It is suitable for extrusion or coextrusion and offers excellent high moisture absorption properties in wet environments, enhancing lubricity against bodily tissue. Furthermore, it is an inherently dissipative polymer and can be dry blended or compounded with an isolative polymer to lower the surface resistivity of the final part.

PEBAX® MV 1074 SP 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SP grade is heat & UV stabilized. It is used in sport and consumer applications. As an hydrophilic grade, when extruded into either a thin film or laminated on to a substrate, it offers excellent permeability to moisture vapor while remaining waterproof. PEBAX® MV 1074 SP 01 is an inherently dissipative polymer and can be dry blended or compounded with an isolative polymer to lower the surface resistivity of the final part.

PEBAX® MV 2080 resin is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. PEBAX® MV 2080 resin is an inherently dissipative polymer and can be dry blended or compounded with an isolative polymer to lower the surface resistivity of the final part.

PEBAX® MV 3000 SP 01 resin is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SP grade is heat & UV stabilized. It is specifically designed for outdoor application that needs excellent weather resistance properties (breathable membranes). This hydrophilic grade, when extruded into either a thin film or laminated on to a substrate, is offers excellent permeability to moisture vapor while remaining waterproof.

PEBAX® Rnew 1100 resin offers an excellent combination of high impact resistance, stiffness and lightness. In addition to high energy return, the main future of Pebax® materials, this grade will bring high performance to a wide range of sport applications: winter sports, team sports. Pebax® Rnew 1100 resin is produced from a renewable source.

PEBAX® RNEW® 30R51 SA 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. It is partially produced from a renewable & sustainable source (castor oil). This SA grade offers the highest quality. It is used in sport and consumer applications, especially when food contact compliance is requested.

PEBAX® RNEW® 35R53 SP 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. It is partially produced from a renewable & sustainable source (castor oil). This natural SP grade is heat & UV stabilized. It is used in sport and consumer applications.

PEBAX® RNEW 40F19 SP 03 is a thermoplastic elastomer made of flexible polyether and rigid polyamide, based on renewable resources. 

PEBAX® RNEW® 40R53 SP 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. It is partially produced from a renewable & sustainable source (castor oil). This SP grade is heat & UV stabilized. It is used in sport and consumer applications.

PEBAX® RNEW® 55R53 SP 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. It is partially produced from a renewable & sustainable source (castor oil). This SP grade is heat & UV stabilized. It is used in sport and consumer applications.

PEBAX® RNEW® 63R53 SP 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. It is partially produced from a renewable & sustainable source (castor oil). This SP grade is heat & UV stabilized. It is used in sport and consumer applications.

PEBAX® RNEW® 70R53 SP 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. It is partially produced from a renewable & sustainable source (castor oil). This SP grade is heat & UV stabilized. It is used in sport and consumer applications.

PEBAX® RNEW® 72R53 SP 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. It is partially produced from a renewable & sustainable source (castor oil). This natural SP grade is heat & UV stabilized. It is used in sport and consumer applications.

PEBAX® RNEW® 80R53 SP 01 is a polyether block amide, a thermoplastic elastomer made of flexible polyether and rigid polyamide. It is partially produced from a renewable & sustainable source (castor oil). This natural SP grade is heat & UV stabilized. It is used in sport and consumer applications.

PLATAMID® B 409 PELLET is thermoplastic copolyamide hot melt adhesive. This grade is a high molecular weight, high melting temperature range, partially crystalline copolyamide. The special interest of this product is the combination of high melting temperature and high melt viscosity. It can be applied out of a cresolic solution. The thermal activation of the hot melt layer can be accomplished by means of induction of hot air. This product is available: - dried with lubricant (B 409 TL) - undried with lubricant (B 409 FL)

PLATAMID® H 005 Pellets is thermoplastic copolyamide hot melt adhesive. This medium melt viscosity grade is ideal for manufacturing of of of materials such as webs, nets, single and multiple filaments, and films using an extrusion process. It is highly resistant to dry cleaning and washing up to 60°C and provides excellent adhesion to a wide range of polar substrates including thermoplastics, thermosets, metal, and natural fibers. This product is available: - dried (H 005 T) - dried with optical brightener (H 005 TA) - undried with optical brightener (H 005 FA)

PLATAMID® H 106 POWDER is a thermoplastic copolyamide hot melt adhesive. This very low melt grade has an excellent dry cleaning resistance and washing resistance up to 40°C and is used in textile applications for the production of fusible interlinings. It is particularly useful when low bonding temperature and short bonding time are required for sensitive shell fabrics. This product is available in different grain sizes: - PA 100 - PA 80 (0-80 µm) - PRA 200/25 (0-200 µm) - PTA 120 (0-120 µm) - PTA 170 (80-170 µm) - PTA 170/20 (0-70 µm) - PA 80 BLACK - PA 80 Red - PRA 170 - PTA 170 BLACK - PTA 170 Red - PTA 60/150

PLATAMID® H 1937 PELLET is a thermoplastic copolyamide hot melt adhesive. This grade is designed to manufacture of hot melt film and webs by extrusion. It has good adhesion to all kinds of textile substrates based on native and synthetic fibers. This product is available dried with optical brightener (H 1937 TA).

PLATAMID H 2513 PELLET is a thermoplastic copolyamide hot melt adhesive. This low to medium melt viscosity, fast re-crystallizing grade is particularly suitable for manufacturing of of of webs, nets, mono- and multi-filaments, and films by extrusion. It has good adhesion to all kinds of textile substrates based on native and synthetic fibers. This product is available dried with optical brightener (H 2513 TA).

PLATAMID H 2513 POWDER is a thermoplastic copolyamide hot melt adhesive. This medium melt viscosity grade is used for the production of fusible interlinings. It offers an excellent laundry resistance up to 60°C and an excellent resistance to all kind of steam treatment. This product is available in different grain sizes: - PA 80 (0-80 ?m paste dot) - PTA 170/20 (0-170 ?m powder dot) - PTA 170 (80-170 ?m double dot)

PLATAMID® H 2616 PELLET is a thermoplastic copolyamide hot melt adhesive. This fast re-crystallizing grade has been developed to manufacture hot-melt webs, nets and mono- and multi-filaments. It provides elastomeric properties and high water vapor transmission rate and it offers a very good adhesion to all kinds of textile substrates based on native and synthetic fibers. This product is available undried with optical brightener (H 2516 FA).

PLATAMID® H 2519 PELLET is a thermoplastic copolyamide hot melt adhesive. It is partially manufactured from a renewable and sustainable source (castor oil). This medium melt viscosity, fast re-crystallizing grade is particularly suitable for manufacturing of of of webs, nets, mono- and multi-filaments, and films by extrusion. It exhibits strong adhesion onto: - rigid and plasticized PVC as well as ABS, epoxy resin, PU, etc. - various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc.) Dense layers of PLATAMID® H 2519 PELLET are known to have barrier properties against PVC plasticizer migration. This product is available: - dried (H 2519 T) - undried (H 2519 F)

PLATAMID® H 2707 PELLET is a thermoplastic copolyamide hot melt adhesive. It is partially manufactured from a renewable and sustainable source (castor oil). This medium to high melt viscosity grade is particularly suitable for manufacturing of of of webs, mono- and multi-filaments, and films by extrusion. It offers a good adhesion at low fusing conditions to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc.). This grade is available dried (H 2707 T).

PLATAMID® H 38 PELLET is a thermoplastic copolyamide hot melt adhesive. This low to medium melt viscosity grade is particularly suitable for manufacturing of of of webs, nets, mono- and multi-filaments and films by extrusion. It offers very good adhesion to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc.). This grade is available: - dried with optical brightener (H 38 TA) - undried with optical brightener (H 38 FA)

PLATAMID® HX 2507 PELLET is a thermoplastic copolyamide hot melt adhesive. This alcohol soluble copolyamides is particularly well suited for coating solutions. It offers good film forming properties, excellent abrasion resistance and good adhesion to both metallic and non-metallic surfaces. The main feature of this product is the ability to form stable solutions after dissolving in lower aliphatic alcohols, such as: - Methanol - Ethanol - Propanol / Isopropanol - Butanol / Isobutanol - or mixtures of these as well as in higher boiling alcohols, such as: - Benzyl alcohol - Cyclohexanol Aromatic hydrocarbons, like xylene, or Solvesso®, can be added at concentrations up to 20 to 30 parts by weight. These hydrocarbons do not interfere with dissolution, and improve storage stability. Solubility in conventional lacquer solvents such as ketones, esters or ethers is negligible. All PLATAMID® grades are compatible in solution. This allows blending to achieve special effects. This grade is available undried (HX 2507 F).

PLATAMID® HX 2544 PELLET is a thermoplastic copolyamide hot melt adhesive. It is partially manufactured from a renewable and sustainable source (castor oil). This very low melt viscosity grade is particularly suitable for manufacturing of of of webs, nets, mono- and multi-filaments, and films by extrusion. It offers a good adhesion at low fusing conditions to various polar substrates (thermoplastics, thermosets, metal natural fibers, and more) and has good dry cleaning resistance and washing resistance up to 60°C. This product is available: - dried with optical brightener (HX 2544 TA) - undried with optical brightener (HX 2544 FA)

PLATAMID® HX 2544 POWDER is a thermoplastic copolyamide hot melt adhesive. It is partially manufactured from a renewable and sustainable source (castor oil). This low melt viscosity grade is designed to manufacture fusible interlinings. It has good dry cleaning resistance and washing resistance up to 60°C and is particularly useful when low temperature and short bonding conditions are required for leather and fur. This grade is available in different grain sizes: - PA80 (0-80 µm paste dot) - PTA 170 (80-170 µm double dot) - PRA 170 (80-170 µm double dot)

PLATAMID® HX 2592 PELLET is a thermoplastic copolyamide hot melt adhesive. It is manufactured from a renewable and sustainable source (castor oil). This low to medium melt viscosity grade is particularly suitable for manufacturing of of of webs, nets, mono- and multi-filaments, and films by extrusion. It exhibits strong adhesion onto: - rigid and plasticized PVC as well as ABS, epoxy resin, PU, etc. - various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc.) Dense layers of PLATAMID® HX 2592 PELLET are known to have barrier properties against PVC plasticizer migration. This product is available: - dried (HX 2592 T) - undried (HX 2592 F)

PLATAMID® HX 2598 PELLET is a thermoplastic copolyamide hot melt adhesive. This medium melt viscosity grade is particularly suitable for manufacturing of of of webs, nets, mono- and multi-filaments, and films by extrusion. It offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc.). This grade is available undried with optical brightener (HX 2598 FA).

PLATAMID® HX 2620 POWDER is a thermoplastic copolyamide hot melt adhesive. This low melt viscosity grade is used to manufacture fusible interlinings. It offers good laundry resistance and good steam resistance at low/medium fusing conditions This product is available in different grain sizes: - PA80 (0-80 µm paste dot) - PRA 170 (0-170 µm double dot)

PLATAMID® HX 2627 PELLET is a thermoplastic copolyamide hot melt adhesive. This grade has been developed to manufacture hot-melt webs, nets and mono- and multi-filaments. It offers a very good adhesion to all kinds of textile substrates based on native and synthetic fibers. Additionally, it provides elastomeric properties and high water vapor transmission rate. This product is available undried with optical brightener (HX 2627 TA).

PLATAMID® HX 2632 PELLET is a thermoplastic copolyamide hot melt adhesive. This very low melt viscosity grade is particularly suitable for manufacturing of of of webs, nets, mono- and multi-filaments by extrusion and then converted into very high viscous product providing additional properties as the bonding temperature resistance. A controlled activation of crosslinking reactions can be achieved during a processing step by various means such as peroxides, UV and e-beams. It offers a very good adhesion at low fusing conditions to various kind of polar substrates (thermoplastics, thermosets, metal, natural fibers, etc.). This product is available undried with optical brightener (HX 2632 FA).

PLATAMID® HX 2651 PELLET is a thermoplastic copolyamide hot melt adhesive. This low melt viscosity grade is particularly suitable for manufacturing of of of webs and nets by extrusion. It offers good adhesion to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc.) thanks to its amine functionality groups. This product is available undried with optical brightener (HX 2651 FA).

PLATAMID® HX 2651 POWDER is a thermoplastic copolyamide hot melt adhesive. This super fluid grade is suitable for manufacturing of of of fusible interlinings, with a better penetration to treated fabric. It offers an excellent laundry resistance up to 40°C. This product is available in different grain sizes: - PA80 (0-80 µm paste dot) - PTA 170 (80-170 µm double dot) - PRA 170 (80-170 µm double dot) - PTA 60 (80-120 µm powder dot)

PLATAMID® HX 2667 POWDER is a thermoplastic copolyamide hot melt adhesive. This medium melt viscosity grade is suitable for manufacturing of of of fusible interlinings. It offers an excellent laundry resistance up to 60°C and an excellent resistance to all kind of steam treatment. This product is available in different grain sizes: - PA80 (0-80 µm paste dot) - PTA 170/20 (0-170 µm power dot) - PTA 170 (80-170 µm double dot)

PLATAMID® HX 2671 PELLET is a thermoplastic copolyamide hot melt adhesive. This very low melt viscosity, fast re-crystallizing grade is particularly suitable for spraying, manufacturing of of of webs, nets, mono- and multi-filaments, and films by extrusion. It offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc) and has a very good dry-cleaning resistance and washing resistance up to 40°C. This product is available undried (HX 2671 F).

PLATAMID® M 1186 PELLET is a thermoplastic copolyamide hot melt adhesive. This very low melt viscosity, fast re-crystallizing grade is particularly suitable for spraying, manufacturing of of of webs, nets, mono- and multi-filaments, and films by extrusion. It offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc) and is resistant against steam sterilization. This product is available: - dried (M 1186 TA) - undried (M 1186 FA)

PLATAMID® M 1276 PELLET is a thermoplastic copolyamide hot melt adhesive. It is partially manufactured from a renewable and sustainable source (castor oil). This medium melt viscosity, fast re-crystallizing grade is particularly suitable for manufacturing of of webs, nets, mono- and multi-filaments, and films by extrusion. It exhibits strong adhesion onto: - rigid and plasticized PVC as well as ABS, epoxy resin, PU, etc. - various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc.) Dense layers of PLATAMID® M 1276 PELLET are known to have barrier properties against PVC plasticizer migration. This product is available: - dried (M 1276 TE) - undried (M 1276 F)

PLATAMID® M 1276 POWDER is a thermoplastic copolyamide hot melt adhesive. It is partially manufactured from a renewable and sustainable source (castor oil). This medium melt viscosity grade is particularly suitable for manufacturing of of fusible interlinings. It has an excellent dry cleaning resistance and washing resistance up to 40°C and exhibits strong adhesion onto: - rigid and plasticized PVC as well as ABS, epoxy resin, PU, etc. - various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc.) This product is available in different grain sizes: - PA80 (0-80 µm paste dot) - PA 300/80 (80-300 µm scatter) - PRA 170 (0-170 µm double dot)

PLATAMID® M 1422 PELLET is a thermoplastic copolyamide hot melt adhesive. This semi-crystallized grade is used in solvent based processes. It has been developed for use in the wire coating industry. This product is available: - undried (M 1422 F) - undried (M 1422/1 F)

PLATAMID® M 1425 PELLET is a thermoplastic copolyamide hot melt adhesive. This semi-crystallized grade is used in solvent based processes. It has been developed for use in the wire coating industry. This product is available undried (M 1425 F).

PLATAMID® M 1657 PELLET is a thermoplastic copolyamide hot melt adhesive. This very low melt viscosity, fast re-crystallizing grade is particularly suitable for spraying, manufacturing of of webs, nets, mono- and multi-filaments, and films by extrusion. It offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc) and has a very good dry-cleaning resistance and washing resistance up to 40°C. This product is available: - dried with optical brightener (M 1657 TA) - undried with optical brightener (M 1657 FA)

PLATAMID® M 1757 PELLET is a thermoplastic copolyamide hot melt adhesive. This low to medium melt viscosity, fast re-crystallizing grade is particularly suitable for spraying, manufacturing of of webs, nets, mono- and multi-filaments, and films by extrusion. It offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc) and has a very good dry-cleaning resistance and washing resistance up to 60°C. This product is available: - dried with optical brightener (M 1757 TA) - undried with optical brightener (M 1757 FA)

PLATAMID® M 1757 POWDER is a thermoplastic copolyamide hot melt adhesive. This low to medium melt viscosity grade is particularly suitable for manufacturing of of fusible interlinings. It has an excellent dry cleaning resistance and washing resistance up to 60°C and good steam resistance at moderate fusing conditions. This product is available in different grain sizes: - PA 80 (0-80 µm paste dot) - PTA 120 (0-120 µm micro powder dot) - PTA 170/20 (0-170 µm powder dot) - PTA 200 (80-200 µm powder dot) - PRA 170 (80-170 µm double dot) - PRA 200 (80-200 µm double dot)

PLATAMID® M 1943 PELLET is a thermoplastic copolyamide hot melt adhesive. This medium melt viscosity, fast re-crystallizing grade is particularly suitable for spraying, manufacturing of of webs, nets, mono- and multi-filaments, and films by extrusion. It offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc). This product is available dried with optical brightener (M 1943 TA).

PLATAMID® M 2395 PELLET is a thermoplastic copolyamide hot melt adhesive. This medium melt viscosity, fast re-crystallizing grade is particularly suitable for manufacturing of of webs, nets, mono- and multi-filaments, and films by extrusion. It exhibits strong adhesion onto: - rigid and plasticized PVC as well as ABS, epoxy resin, PU, etc. - various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc.) Dense layers of PLATAMID® M 2395 PELLET are known to have barrier properties against PVC plasticizer migration. This product is available dried (M 2395 T).

PLATAMID® M 2468 PELLET is a thermoplastic copolyamide hot melt adhesive. It is partially manufactured from a renewable and sustainable source (castor oil). This low to medium melt viscosity, fast re-crystallizing grade is particularly suitable for spraying, manufacturing of of webs, nets, mono- and multi-filaments, and films by extrusion. It offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc) and has a very good dry-cleaning resistance and washing resistance up to 60°C. This product is available: - dried with optical brightener (M 2468 TA) - undried with optical brightener (M 2468 FA)

PLATAMID® M 995 PELLET is a thermoplastic copolyamide hot melt adhesive. This high melt viscosity grade is particularly suitable for manufacturing of of of films and masterbatches. It offers very good adhesion to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc). This product is available: - dried (M 995 T) - undried (M 995 F)