Kepstan^® PEKK polymers
Ultra-Performance thermoplastics

Three Different Series of Grades

Find your material grade 

Tailored Processibility

Unlike some other members of the PAEK (polyaryl-ether-ketone) polymer family, Arkema's Kepstan^® PEKK polymers are highly customizable in terms of performance. Arkema achieves this customization or fine-tuning by carefully balancing the ratio of terephthalic ("T") and isophthalic ("I") monomers. Controlling this "T/I" ratio allows Arkema to produce grades with a range of crystallization rates and melt temperatures depending on the targeted method of final part production as well as the intended final use of the part itself.

Another dimension of polymer design is Arkema's tailored molecular weight control - allowing grades with highly specific melt volume indexes (from highly fluid to highly viscous).
These grades are then optionally filled with performance enhancing additives such as glass or carbon fibers, or carbon nanotubes.

The result is a portfolio of grades that may be extruded, 3D printed (selective laser sintering and fused filament fabrication), powder coated, injection molded, rotomolded, or impregnated in unidirectional composite tape fibers. Certain grades produced by certain processes may be even further optimized by careful choice of post-treatment or annealing conditions.

Amorphous or Semi-crystalline Kepstan® PEKK Powder Coatings

Kepstan^® PEKK powder coatings can be coated in the amorphous state and left as-is, or annealed to the semi-crystalline state. Amorphous Kepstan^® PEKK coatings retain higher flexibility, allowing for even better adhesion, especially for parts subjected to intense thermal cycling. Semi-crystalline coatings offer better temperature, chemical, and wear resistance. Contact us to discuss your coating application.

Global Supply

Kepstan^® PEKK resins are manufactured in the USA and France. They are manufactured, marketed, and serviced as part of Arkema's High Performance Polymers business unit.